TELEPHONE

   0086-21-58383098

   E-mail

   sbm@unisbm.net

   FAX

   0086-21-58383058

Safty Technology of Vibrating Feeder

1. Regular maintenance and examine are the main methods to prolong the using life and guarantee the normal work of the machine, customers should pay special attention to it. For lubricating oil, the following issues deserve more attention:
(1) Thin oil splash lubrication are adopted in this machine; the location and climate decide the choice of lubricating oil, the gear oil are generally adopted;
(2) Ensure the thin oil in the vibration exciter is above the oil level indicator (infuse through joint bending pipe); replace oil every 3-6 months, before infusing fresh oil, wash surface of oil tank, bearing rolling path and gear wheels by clean gasoline or kerosene;
2. Safety technology
(1) The machine operators should take safety technology education;
(2) During operation, strictly prohibit standing near machine, touch machine by hand, adjusting, cleaning or repairing;

Knowledge about Installation

The equipment after assembly is provided by manufacturer and check shall be carried out as soon as receiving product in order to avoid possible troubles during transportation.
1. It is suggested to install the equipment on concrete base to decrease vibration, noise and absorption of shock in order to avoid impact on building base. Adding ironwood, rubber belt or other buffer materials may as well.
2. Weight of base can be determined at 5-10 times of that of equipment and the depth of base shall be more than that of local frozen earth. Refer to the Base figure for locations of installing equipment and foundation bolt.
3. Before adjusting discharge door, release strain spring, and then adjust spring in order to prevent drop of ancon plate.

• Jaw Crusher Basic Knowledge Introduction
• Maintenance and Use of Jaw Crusher